Electric Sovereign 4 Column 660mm Cast Iron Radiators with 1200W Heating Element
Electric Sovereign 660mm 4 Column Cast Iron Radiators
Radiator Height: 660mm or 19 inches
Radiator Depth: 144mm or 6 7/8 inches
Arrives painted, tested and assembled with all bleed valves, bushels and end caps.
Requires the electric heating element to be fitted and filling with water on site .
About our Electric Cast Iron RadiatorsMany of our Cast Iron Radiators can be converted to Electric Cast Iron Radiators by adding one of our heating elements. There are limitations when using an electric heating element. Firstly, the cast iron radiator needs to be long enough to house the heating element and secondly, the heating element needs to be powerful enough to heat the cast iron radiator in a reasonable amount of time.
Not all of our castings are suitable for using with a heating element. The maximum operating temperature for electric cast iron radiators is 65 degrees Centigrade, meaning that they have a slightly lower heat output than the same radiator used in a traditional wet plumbing system.
The time it takes to heat the radiator to operating temperature depends on several factors: the weight of iron in the radiator, the volume of water it contains, the wattage of the heating element, and the typical heat output of the cast iron radiator.
The larger the radiator the higher the heat output once the radiator reaches operating temperature, but the longer it will take for the radiator to reach this temperature and the more electricity will be required to keep it at this temperature. If the radiator is too large for the heating element it will never get hot.
We have done the calculations to help you choose the best radiator for your situation:
|Number of Columns||8||9||10||11||12||13|
|Heat output Watts (ΔT=45)||608watts||684 watts||760watts||836watts||912watts||988 watts|
|Heat output BTU (ΔT=45)||2080BTU||2340 BTU||2600BTU||2860 BTU||3120 BTU||3380BTU|
|Internal Water Volume||7.12l||8.01l||8.9l||9.79l||10.68l||11.57l|
|Approx. Weight of Iron||44.8kg||50.2kg||55.6kg||61kg||66.4kg||71.8kg|
|Estimated Time to reach operating Temperature (1200W HE)||42-50mins||50-60mins||59-73mins||70-90mins||83-115mins||100-163mins|
Further information can be found on our blog:
- End Caps, and touch up paint all included as standard
- Victorian reproduction cast iron radiators
- Hand-built and delivered assembled
- Tested to conform to BS EN442-1 & BS EN444-2
- Pressure tested to 8 bar
- 10 year guarantee
We have a strict quality control process to ensure that alll cast iron radiators are of the highest quality. All radiators are delivered to you fully assembled and tested in accordance with the British standard. They also have a full 10 year guarantee to ensure peace of mind for years to come.
Orders can be placed online or you are welcome to call our friendly staff on 01723 321000 who will be happy to assist you. If you would like a different colour or finish - please search for princess cast iron radiators or review our related products at the bottom of this page.
Delivery is made using a pallet service, delivery time does change according to the time of year and how busy our North Yorkshire factory is at the time of your order. Please contact us directly on 01723 321 000 if you need your cast iron radiators within 14 days.
Optional stays and can also be added to this order.
14inch Sovereign 4 Column Cast Iron Radiators Alternative Paint Colours and Finishes
We also Stock the complete range of Farrow and Ball Colours
We stock low VOC water based National Trust paint from Fired Earth - note that this may add to painting time.
We also have access to the beautiful English Heritage range of paints from Little Greene.
|'Standard Antiquing' is black applied to any undercoat - usually a light colour like French Grey. More advanced Antiquing options can be found at our Antiqued Cast Iron Radiators page which are priced individually.|
|Brand||Cast Iron Radiators|